Utvidet returrett til 31. januar 2025

Bøker i Workshop Practice-serien

Filter
Filter
Sorter etterSorter Serierekkefølge
  • av Harold Hall
    151,-

    A project book including 18 designs for workshop equipment based on the author's popular articles published in Model Engineer's Workshop magazine. The projects are in themselves satisfying exercises in metalworking that once completed will make valuable additions to the model engineer's range of equipment.

  • av David Fenner
    145,-

    This book is a complete course on using and improving the new generation of budget lathes. It explains everything from setting up and 'tuning' the machine for best performance to using accessories and carrying out tasks.

  • av Arnold Throp
    151,-

    Small workshops, including those of model engineers, are making increasing use of small vertical milling machines. This book explains how to use them (and lathe milling attachments) in clear terms.

  • av Alex Weiss
    135,-

    This practical book describes the wide range of bearings found in different types of models built in home workshops. It reviews the choice of bearings, materials, the type of bearing to use for each particular application and highlights the differences between home made and off-the-shelf bearings.

  • av Ivan Law
    133,-

    Explanations and reasons for all conventional types of gears are clearly set out in this book together with useful tables and machinery techniques to form an invaluable reference work for anyone dealing with machinery.

  • av Tubal Cain
    129,-

    In this book, Tubal Cain discusses drills and drilled holes and threading with taps and dies, primarily by hand. Imperial and metric sizes plus conversions are included together with all standard thread gauges, sharpening etc.

  • av Harold Hall
    151,-

    When Harold Hall was Editor of Model Engineer's Workshop magazine, he was surprised by how just so many of his readers had no access to a workshop at home, or even at college. His new book is a complete guide to building or converting and equipping a workshop space.

  • av Harold Hall
    135,-

    Sharpening workshop tools is one task that is least understood by the majority of workshop owners. This book illustrates how most sharpening tasks can be carried out using an off hand grinder and a few simply made accessories to a standard comparable to that achieved using much more sophisticated equipment.

  • av Stan Bray
    151,-

    A complete introduction to the process of the grinding and polishing of metals that gives specific details of the equipment and devices needed and the materials used to make grinding wheels, belts and papers.

  • av Jim Cox
    135,-

    All types of electric motors for workshop use are described here. Principles, characteristics, operation, installation, speed control, braking etc. plus generators, safety, testing and a useful section on identifying and applying scrap motors.

  • - A Complete Course
    av Harold Hall
    151,-

    A comprehensive introduction to the milling machine, assuming no previous experience, by one of Model Engineers' Workshop magazine's leading authorities. Eight projects lead prospective model engineers through all of the techniques involved; each project is extensively illustrated with step-by-step photographs and workshop drawings.

  • av Stan Bray
    151,-

    An introduction to the fascinating world of horology for the complete beginner. This book explains the terminology of the clockmaker and provides general details of clock construction including layout of wheels and escarpments, all of which are fully described and illustrated.

  • av Harprit Sandhu
    135,-

    Describes the design, construction and use of a variety of spindles that will be of interest to the amateur engineer. Milling, grinding and drilling spindles are covered along with a unique light gear cutting frame for clockmakers.

  • av Bob Loader
    165,-

    A Unimat mini-lathe authority has developed numerous accessories and techniques to assist the model engineer in getting the best from the machine. These projects increase the scope of the machine and advise on the performance of a number of tricky operations.

  • av Harold Hall
    152,-

    Contains a comprehensive range of mathematical data which is required in the metalworking workshop and by those designing a wide range of engineered items, tools and machines. This book provides in a single concise volume that is otherwise only available by reference to many different sources.

  • av Harold Hall
    151,-

    The principles underlying radial work on a metalworking lathe are explained in depth in this book. It covers the methods that can be adopted: from simple applications without specialised equipment to the use of a semi-universal dividing head and a rotary table.

  • - A Complete Course
    av Harold Hall
    145,-

    This book assumes no previous experience and using the medium of twelve lathe turning projects will lead prospective model engineers through all of the basic techniques needed to tackle ambitious projects. All of the projects are extensively illustrated and full working drawings accompany the text.

  • av Alex Weiss
    151,-

    This book describes the many and varied materials used by model engineers in their workshops such as ferrous and non-ferrous metals, hard and soft woods, plastics, abrasives, adhesives, bearing materials, ceramic and refractory materials, castings, electroplating solutions, fuels, gases, lubricants, pickles, polishing materials, sealants and solder

  • av Terry A. Aspin
    145,-

    This book covers basic principles of foundrywork - materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas, coke furnaces and step-by-step procedures. Although written primarily for the model engineer, anyone wishing to make mouldings or castings will profit from its pages.

  • av Tubal Cain
    133,-

    This book is a thorough and practical discourse on how to use the lathe for all types of milling work. Next to turning, the most valuable use of the lathe is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by adding a separate milling attachment.

  • av Les Oldridge
    133,-

    Model engineers and amateur metalworkers need to learn the tricks and handwork which experienced engineers take for granted. This book details normal bench practice suitable for engineering apprentices which will save spoiled work and tools.

  • av Tubal Cain
    133,-

    A comprehensive exposition of the structure of steels and the effects of different heat treatments, particularly in respect of tools. With accurate colour temperature charts.

  • av Tubal Cain
    133,-

    Joining metal by one form or another of soft and hard soldering, or brazing with various alloys, are run-of-the-mill jobs in model and light engineering workshops. Tubal Cain examines the processes, equipment, materials and explains what is happening in the joints as they are made.

  • av Stan Bray
    152,-

    This book deals with all aspects of the lathe covering the selection of a machine and its construction, including modern types of machine as well the more traditional models. All aspects of tooling, both traditional and modern are covered in depth, as are all machining operations.

  • av Stan Bray
    151,-

    A collection of fifteen invaluable additions to model engineer's armoury of tools and equipment from the former editor of Model Engineer's Workshop magazine. This practical collection covers benchwork, the lathe and milling operations.

  • av Martin Cleeve
    133,-

    A fully comprehensive survey of the use of a lathe for all forms of screwcutting in all thread forms, imperial and metric. Calculations, gear trains, conversions, etc are all explained and also set out in tabular form.

  • av Tubal Cain
    127,-

    Tubal Cain, who has enjoyed more than sixty years experience in designing and building engines and machines (in both full size and model scale) shares his experiences of making 52 ancillary lathe devices.

  • av Tubal Cain
    130,-

    A fundamental requirement of the lathe operation is the ability to hold any workpiece securely on the machine. In this book, the author discusses all the practical aspects of the subject, with photographs to illustrate specific points.

  •  
    135,-

    A selection of useful hints and tips for metalworkers culled from a seventy years of Model Engineer magazine - as relevant today as when they were first printed. Includes many helpful nuggets of knowledge which have never been republished until now.

  • av Ivan Law
    151,-

    Model engineers and many small workshops do not need, or have access to, much of the sophisticated measuring equipment used in industry. Accurate marking out and measurement by more basic means at all stages of work are comprehensively described by an expert engineer.

Gjør som tusenvis av andre bokelskere

Abonner på vårt nyhetsbrev og få rabatter og inspirasjon til din neste leseopplevelse.