Utvidet returrett til 31. januar 2025

Bøker utgitt av Industrial Press Inc.,U.S.

Filter
Filter
Sorter etterSorter Populære
  • av Uni-Bell PVC Pipe Association
    1 149,-

    Prepared with the objective of being the most comprehensive reference text on PVC pipe and fittings, this handbook provides practical engineering and construction information together with recommendations applicable to the design and use of primarily underground PVC piping systems, in both pressure and non-pressure applications.

  • av Michael Spektor
    1 419,-

    This book is primarily a guide for professionals and can be used by students of Dynamics. It features 96 real-life problems in dynamics that are common in all engineering fields; including industrial, mechanical and electrical. And it uses a special table guide that allows the reader to find the solution to each specific problem. The descriptions of the solutions of problems are presented in the chapters 3 to 18. The analysis of the structure of the differential equation of motion, as well as the analysis of the components that constitute this equation presented in the Chapter 1 allow readers to understand the principles of composing the differential equation of motion for actual engineering systems. Presents the straightforward universal methodology of solving linear differential equations of motion based on the Laplace transform. The table of Laplace Transform pairs presented in the Chapter 1 is based on reviewing numerous related analytical sources and represents a comprehensive source containing sufficient information for solving the differential equations of motion for common engineering systems. Helps determine the number of possible common engineering problems based on the analysis of the structure of the differential equation of motion, as well as on the realistic resisting and active loading factors that constitute the differential equation of motion. Each paragraph represents a standalone description. There is no need to look for notations or analytical techniques throughout the book. The book contains all required supplemental information for solving the problems.

  • av Karl Moltrecht
    709,-

    If your hobby requires you to cut metal, Moltrecht provides the basics you need to learn machining and set up a small home workshop. He covers layout, space requirements, lighting, ventilation, and safety, as well as tips on some of the key tools and processes covered in the book.

  • av Matthew J. Franchetti
    1 277,-

    This authoritative guide presents managers and engineers with proven strategies for implementing sustainable systems and practices in their manufacturing operations. Readers will gain a solid understanding of the challenges involved in sustainability by examining integrated strategies and practical tactics in the context of real-world industry applications. In this discussion, the authors effectively address the issues, costs, and value of sustainable design, environmentally sound resource, process, and facility management, waste minimization and pollution prevention, maximizing energy efficiency and sustainable energy sources, and green supply chain management.FeaturesA coordinated road map of proven, integrated strategies for creating value through sustainable manufacturing systems and practices applies to a broad range of industry applications and organizations.Ready-to-use assessment techniques, performance evaluations, and economic and cost-benefit analyses, plus case studies, provide guidelines for managerial and engineering practitioners in the field.Clear discussions cover key areas of sustainable manufacturing--from design, facility, material, resource, waste, and energy management to supply chain, logistics, and maintaining sustainability.Dr. Matthew Franchetti (Toledo, OH) is an Associate Professor of Mechanical, Industrial, and Manufacturing Engineering and the Director of Undergraduate Studies for the Mechanical Engineering Program at the University of Toledo in Ohio. He is the Director of the Environmentally Conscious Design and Manufacturing Laboratory and the Principal Investigator for the Business Waste Reduction Assistance Program, a joint effort with local government. Prior to his work in academia, Dr. Franchetti served as an industrial engineer and technical manager for the U.S. Postal Service. A Certified Six Sigma Black Belt and a professionally licensed engineer, he has helped numerous companies reap the benefits of sustainable practices. Behin Elahi (Toledo, OH) is a Ph.D. candidate in Industrial Engineering at the University of Toledo, having received her M.S. in this field in 2011. Her research interests include green supply chain, operation research, quality control, and mathematical programming, and she has published more than sixteen conference and journal papers. Since 2012, Elahi has been a consultant and one of the project managers of the Business Waste Reduction Assistance Program under the supervision of Dr. Franchetti. She is an executive officer for the Institute of Electrical and Electronics Engineers (IEEE) Toledo section and a member of the University of Toledo Engineering Council (UTEC), the Golden Key International Honour Society, and the Society of Women Engineers. Somik Ghose (Tokyo, Japan) also is pursuing his Ph.D. in Industrial Engineering at the University of Toledo. He completed his M.S. in the field of Civil Engineering in 2003 and has worked for eight years as an engineer and manager at the Center for Innovative Food Technology/Edison Industrial Systems Center, one of Ohio's Manufacturing Excellence Partnership (MEP) centers. Ghose has participated in projects involving implementation of water and wastewater improvements, waste-to-energy processes, biofuels, energy efficiency, and renewable energy technologies in the automotive, manufacturing, food-processing industries. Toledo, OHCh 1. Introduction to Sustainable Manufacturing Ch 2. Proactive Sustainable Manufacturing Road-Map Ch 3. Management Strategies and Tactics for Sustainable Manufacturing Ch 4. Sustainable Facility Management Ch 5. Environmental Resource Management and Pollution Prevention Ch 6. Waste Minimization and Material Recycling Ch 7. Hazardous Waste Management Ch 8. Energy Resource Mana

  • av Cheryl R. Shrock
    594,-

  • av Daniel Daley
    856,-

    None of the few Design for Reliability (DFR) books currently available addresses the process from the owners (or buyers) perspective. Instead, they approach DFR strictly from the sellers (or manufacturers) viewpoint. As a result, few assets are designed and developed with the intent to meet the future owners specific needs for reliability, availability, and maintainability over the life of the asset. In this groundbreaking new book, Dan Daley intends to correct the imbalance in how DFR is often implemented by providing owners with the tools they need to ensure that their requirements - not the sellers - are followed in developing new assets. This book will be an invaluable guide to everyone involved in the design, development, or purchase of new assets. It will help owners take the necessary steps to get what they really need, and it will help sellers deliver the goods that their customers the owners actually want.

  • av Cheryl Shrock
    804,-

    This is the right book for users who liked the author's "Beginning AutoCAD" workbook and want to learn more about AutoCAD's features, including Xref, Attributes, and 3D solids. This clear, no nonsense, easy-to-follow text is totally updated for AutoCAD 2017 and 2017 LT, and it offers several new and improved features. All exercises are easy to print on standard 8 1/2" x 11" paper. For use with the PC version of AutoCAD 2017 only.

  • av Dr. Samuel Guccione
    978,-

    This groundbreaking text/lab manual introduces significant concepts in the fields of Human Machine Interface (HMI) and Programmable Logic Controllers. Hands-on, step-by-step activities provide experiences in creating various process-control applications with HMI devices and software--programming that enables an HMI system operator to interface and interact directly with the system. This book is ideal for introducing high school and college students, plus those in the professional fields of process control and automation, to the capabilities and potential of HMI.FeaturesIntroduces students and those in industry to the capabilities of Human Machine Interface. The text and activities, while ranging from basic to more advanced, assume no prior experience working with HMI devices and software.Readers experiment with programming that enables an HMI system operator to interface and interact directly with the systemThe many hands-on lab activities provide experience in creating and working with the type of process control applications that are used extensively in manufacturing.Includes key information on connecting HMI to Programmable Logic Controllers.Focuses primarily on Allen Bradley devices and Rockwell software, but concepts covered are that are applicable to various systems.Dr. Samuel Guccione is a professor in the School of Technology at Eastern Illinois University. He has taught a variety of undergraduate and graduate courses in high technology. He is a member of the Association of Technology, Management and Applied Engineering. Dr. James McKirahan also has taught a variety of manufacturing and industrial technology courses at Eastern Illinois University. He currently teaches courses in Technology Management and Systems at Indiana State University. Ch 1: Introduction to Human Machine Interface and Programmable Logic Controllers for Process Control - Ch 2: Types of HMI Displays - Ch 3: Rockwell Automation HMI Softwares - Ch 4: Panel Builder32 & Graphic Terminal Labs: Lab 1- Basic Motor Starter / Lab 2- Analog & Digital Displays / Lab 3- Pump & Tank / Lab 4- Alarms / Lab 5- Analog Input with Math Operations / Lab 6- Security - Ch 5: RSView32 Computer Based Labs: Lab 1- Basic Basic Motor Starter / Lab 2- Analog & Digital Displays / Lab 3- Pump & Tank / Lab 4- Alarms / Lab 5- Math Operations, Subprograms & Alarms / Lab 6- Security / Lab 7- TrendX Charting & Data Logging / Lab 8- Moving Animation

  • av Uni-Bell PVC Pipe Association
    642,-

    "This guide is the most concise and authoritative available for the installation of PVC gasket-joint pressure and non-pressure pipes and fittings. Written and sponsored by the Uni-Bell PVC Pipe Association, it contains up-to-date information and comes complete with practical associated tables and figures that will help users to be more effective and efficient at installing PVC piping systems. This work provides preferred methods of installation based on field experience, published reports, and other industry sources. The guide's unique, easy-to-use reversible-book format provides two valuable guides in one--for working on water pipes or sewer pipes--making it easy for readers to quickly access the specific information they are seeking, be it on the job, in training, or studying for certification."--Amazon.com

  • av Rex Miller
    853,-

    Designed for use as both a text and study guide for those students taking the licensing test in plumbing. Here, in one book, the entire plumbing trade is covered in one accessible source. Tools and instruments are included to familiarize candidates with labour-saving devices and their correct utilization.

  • av Stephen Malkin
    1 277,-

    Presenting a comprehensive and consistent treatment of grinding theory and its practical utilization, this new edition focuses on grinding as a machining process using bonded abrasive grinding wheels as the cutting medium. Logically organized, this self-contained resource starts with a description of abrasives and bonded abrasive cutting tools; then moves on to thermal analyses of the grinding process for conventional, creep feed, and superabrasive grinding; and ends with methods for enhancing and optimizing of grinding operations, simulation of grinding processes, and computer control of grinding machines. The perfect reference for practicing engineers involved in the grinding process, it will also be useful for researchers working in the field. * Features a unified and self-contained presentation about what is known about grinding processes and how this information can be practically applied.

  • av JR Lanthier
    778,-

    In the field of maintenance, good problem-solving practices are among the most important elements to maximizing equipment uptime, and by resolving the root cause of the failure, in increasing equipment reliability. To be successful, an organization must be able to resolve the effects of a failure quickly so that it can go back to normal, and, in some cases, determine the cause of the failure so that a permanent solution can be identified and implemented. These are two distinct requirements (troubleshooting and root cause failure analysis), with distinctive requirements. Both are important, and one cannot exist without the other if we want to be efficient and effective in resolving asset failures. This work takes a unique approach to equipment failure-related problem solving by presenting both types of failure resolution techniques, the purpose of each, and describing how best to use them. In presenting root cause failure analysis, the book distinguishes between information gathering and failure analysis. It provides five information gathering methods and three root cause analysis methods from the 5-Whys to Logic Tree Analysis to Single Functional Failure RCM. It follows a structured approach to managing the RCFA, from stabilizing the site and gathering information, to implementing and sustaining the results, to leveraging the solution. This book provides practical methods and tools needed to achieve problem-solving goals and objectives, both when troubleshooting a problem as well as when determining a permanent solution. All of this information is kept to a concise and extremely readable length and format. The market needs a practical troubleshooting and RCFA guide that is not software specific and that provides a clear, structured approach to both. This work is that rare find.  FeaturesExplores problem solving as a science.Focuses on how to help an organization be successful, both at quickly getting the plant back in operation, and defining permanent solutions.The only book to detail troubleshooting and RCFA under the same cover.J R Paul Lanthier, P. Eng., is a facilitator, practitioner, trainer, coach, mentor, project manager, practice lead, Director, VP of Operations, and President. He has worked in the fields of asset management, organizational engineering, reliability and maintenance at all levels in various industry sectors worldwide. Paul is the former Director of ‘The Aladon Network,’ and leader for RCM2, as well as former Director of Reliability Services at Ivara Corp. As a professional Engineer with nearly 40 years’ experience, he is a recognized technical leader in the field of asset management and an author of multiple books.Introduction to Problem Solving; Part I: UNDERSTAND FAILURES: Understanding Failures. Part II: TROUBLESHOOTING: Troubleshooting. Part III: ROOT CAUSE FAILURE ANALYSIS (RCFA): Overview of RCFA. Conducting an RCFA. Conclusion.

  • av John L. Ross
    780,-

    In his fun and informative book, John Ross breaks down the concept of asset management into relevant working elements. With ample space to jot down your thoughts and own experiences, this work is like Mad Libs for anyone wanting to implement Asset Management.

  • av Ken Evans
    944,-

    This new text is focused on providing readers the knowledge base needed for those seeking certification, credentialing and job readiness in CNC Machining with CNC Mills and Lathes. The book covers foundational skills that all those seeking employment as a CNC Operator/Machinist must possess. Managers responsible for workforce development in manufacturing facilities can use the book as a guide for on-the-job employee training and apprenticeships. The work can be used as a curriculum component for technical schools and colleges for students preparing for certification and credentialing exams based on the National Institute for Metalworking Skills (NIMS) Machining Level I standards for: CNC Mill Programming and Setup and Operations, and CNC Lathe Programming and Setup and Operations.

  • av Cheryl Shrock
    783,-

    This is the right book for users who liked the author's "Beginning AutoCAD" workbook and want to learn more about AutoCAD's features, including Xref, Attributes, and 3D solids. This clear, no nonsense, easy-to-follow text is totally updated for AutoCAD 2016 and 2016 LT, and it offers several new and improved features. All exercises are easy to print on standard 8 1/2" x 11" paper. For use with the PC version of AutoCAD 2016 only. New Features include ... - Start Tab page, containing two sliding content frames, Learn and Create, enabling you to quickly access recent drawing files, templates, product updates, and online resources. >Improved Features include ... - Enhanced Status Bar, giving you greater control of the tools you want displayed. - Isometric Grid Pattern now displays Lines instead of Dots. - Command Preview is enhanced to allow for Blend, Erase, Scale, Stretch, and Rotate commands. - Improved graphics with Line Smoothing and the display of perfect curves.

  • av James Valentino
    1 616,-

    This unique text presents a thorough introduction to SolidWorks for students with little or no prior experience. It can be used in virtually any educational setting -- from four-year engineering schools to community colleges and voc/tech schools to industrial training centers -- and will also serve as a reliable reference for on-the-job use or as a self-study manual.

  • av Dan Jackson
    1 016,-

    Statistics for Quality Control is a basic level study of statistics used in a production operations setting. It is primarily intended for students entering quality control or other industrial and operations careers. It covers introductory topics such as a brief background, measurements, and graphing techniques. It then moves on to the beginning statistics necessary to understand these practices commonly found in industry and ends with coverage of quality assurance issues along with some pertinent managerial practices associated with this topic.

  • av Roger D. Lee
    862,-

    Einstein said that insanity is doing the same thing over and over again and expecting different results. Yet that is exactly what is happening in maintenance organizations. How many times have clients told consultants, But weve always done it this way?!

  • av Fred Fulkerson
    809,-

    Provides a complete course, taking readers step-by-step through the basic operations of SolidWorks 2014. Written by an expert of this versatile program, it reveals how SolidWorks, a full two-way parametric design tool, can be used to create fluid models with myriad features.

  • av Cheryl Shrock
    783,-

    This is the right book for users if they liked the authors ''Beginning AutoCAD'' workbook, or

  • av Robert Perez
    657,-

    This compact and unique reference provides those who deal with industrial machines a handy guide for assessing the potential risk of failure and offers a solid basis for reliable and safe machinery operation. Combining the most commonly used assessment tools into one source, it is meant to be taken into the field by operators, plant supervisors, maintenance personnel, and reliability professionals in order to make informed decisions about their equipment. This is the only reference available that assembles a body of sound operating practices. It includes guidelines for gauging machine maladies, such as vibration and pulsation. It provides guidelines for key machine factors, such as lubrication condition, temperature limits, alignment, and balance standards. It presents numerous relevant examples within each section aimed at helping readers understand the proper application of the various assessment methodologies.

  • av Merwan Mehta
    1 135,-

    "This textbook presents fundamental concepts that engineering students need to master in one semester. The author applies an incremental learning method, starting with resolving personal financial matters and gradually progressing to the complexities of engineering economic calculations. Practical examples and exercises with answers at the end of each chapter teach students to solve problems using Microsoft Excel without the need for calculus. Future engineers also will gain valuable skills such as the ability to effectively communicate the results of their analyses to financial professionals"--

  • av S.C. Jonathon Lin
    1 356,-

    This text is a comprehensive introduction for students in community colleges and four-year universities that cover all of the essential topics and skills that first-time students need to know. Topics include control basics, numbers, logic, PLC program design, and systems. The secondary market includes people in industry; especially in electrical control, automated systems, and manufacturing.

  • av David Herres
    1 277,-

    Elevators move large numbers of people up and down each day, mostly without incident, thanks to a strongly developed system of safety measures and the work of highly trained and experienced professionals.             In performing elevator maintenance and repair, there are numerous technical factors, not to mention huge moral and legal issues. Workers need to fully understand proper maintenance procedures so that all safeguards remain in effect. It’s also essential to be aware of applicable regulations, and to maintain compliance at all times.             For those serious about engaging in elevator work, the appropriate licenses must be acquired—an electrician’s license and elevator mechanic’s license. These are not achieved overnight.                This work covers everything a student or current technician needs to know to perform elevator diagnosis, maintenance, troubleshooting, and repair, and details all the knowledge a technician must have to properly service elevators in various situations. It is also the only work that includes helpful questions and corresponding answers for those who are studying to obtain their elevator mechanic’s license.  FeaturesOffers sample certification questions and answers for those looking to get their Elevator Mechanic’s license.Places an emphasis on safety interlocks and the elevator system as a whole.Includes a history of elevators to give readers perspective on the industry and advancements in technology to date.Written by a renowned electrician with regular columns and contributions in Elevator World and Electrical Construction and Maintenance magazines.David Herres, is a retired Master Electrician who owned his own construction company. He is the author of 4 books, and currently writes a weekly column and creates videos for Design World/ Test and Measurement.  He has also contributed articles to such renowned journals as ELEVATOR WORLD and Electrical Construction and Maintenance.1. History. 2. Types of Elevators. 3. AC and DC Electric Motor Maintenance, VFD Troubleshooting, and Diagnostic Procedures. 4. Advanced Motor Repair. 5. Troubleshooting Elevator Systems. 6. Elevator Troubleshooting Tools and Instruments. 7. Measuring Power Quality: How May It Be Improved. 8. Elevator System Overview. 9. Motion Controller. 10. Systems Connected to Elevator Installations and How They Work in Concert. Appendix A: Study Question Answers. Appendix B: Electrical Laws and Equations.

  • av Cheryl R. Shrock
    804,-

    The world-renowned workbook that has been teaching AutoCAD users for more than two decades is more engaging and relevant than ever. For those new to the world of AutoCAD, as well as those honing long-time skills, there is simply no better resource on the market than the Beginning AutoCAD 2019 Exercise Workbook.

  • av Brent Stojkov
    799,-

    Written for engineers, operators, and maintenance technicians in the power generation, oil, chemical, paper and other processing industries, The Valve Primer provides a basic knowledge of valve types and designs, materials used to make valves, where various designs should and should not be used, factors to consider in specifying a valve for a specific application, how to calculate flow through valves, and valve maintenance and repair. If you are involved in valve selection, specification, procurement, inspection, troubleshooting or repair, you will find a wealth of information in The Valve Primer. Presents information on a wide variety of valves and explains the operational basics of the thousands of valves that are found in power stations, refineries, plants and mills throughout the world.Includes over fifty illustrations depicting various valve types and how they operate.Contains valuable information the cannot be found in any other single source.  IntroductionGate ValvesGlobe ValvesCheck ValvesButterfly ValvesBall ValvesPlug ValvesDiaphragm ValvesMaterialsSizes, Classes, and RatingsFluid Flow Through ValvesValve Operators and ActuatorsControl Valves and Pressure Relief ValvesSelectionMaintenance and RepairMiscellaneous TopicsStandardsGlossary

  • av Ramesh Gulati
    594,-

    Drawing upon the authors many years of shop floor and management experience in a variety of industries.

  • av Phillip Slater
    856,-

  • av Joel Levitt
    1 048,-

    Shares the best practices, mistakes, victories, and essential steps for success which the author has gleaned from working with countless organizations. This resource includes check sheets, history of PM, stories, photographs, and case histories. It also provides sample task lists for a variety of equipment with some of the logic behind each task.

Gjør som tusenvis av andre bokelskere

Abonner på vårt nyhetsbrev og få rabatter og inspirasjon til din neste leseopplevelse.